Slim Electronics Bracket
Slim Electronics Bracket
Couldn't load pickup availability
Share
Looking for a handy place to mount your relays, fuses, and other electronics under the hood of your First Gen Tundra? Mounting right above your brake booster (without preventing access to the master cylinder), this is the perfect accessory to clean up your after market wiring. The Non- Slotted tray is meant for you to drill your own holes for a custom fit, and the Slotted tray is meant for use with old style Auxbeam 8-Button switch controller and circuit breaker. We've tested it with some of the third party Amazon options as well and they fit the same as pictured.
Included are 2 bolts / washers for easy mounting to the factory holes. The tray is approximately 9” wide and 3” deep.
The Non- Slotted and Raw Finish trays are shipped in unfinished aluminum as the assumption is you’ll be drilling custom holes to mount your accessories; you can spray paint, anodize, etc after you have drilled your holes if desired.
The Slotted/Powdercoated tray is fully coated for a slick, black appearance and comes with nylon washers as well to prevent hardware from rubbing on the finish during install.
This product has been developed with a universal fit in mind: it will fit all models of First Gen Tundra regardless of master cylinder, and should fit 3rd gen 4Runners and first gen Tacomas as well (more information forthcoming).
Installation notes:Only tool needed is a 4mm Allen Key.
When mounting, it will seem uneven, but try and match the curve of the cab above the brake booster to give yourself the most mounting room possible. If you have a hard line in that location, remove the hard line currently bolted above the brake booster, and reroute the lines directly to the smog canister. This is easy and causes no check engine lights.
Remember to check your spacing for any accessories mounted to the tray and that they will not interfere with the hood closing. The space narrows the closer you go to the drivers side; if unsure, put a small tower of Playdoh on your tray and close the lid. Whatever height the tower is squished to is the working height you have to mount accessories.
Remember the wise words: measure twice, drill once.
Lic Design and partnership with Amish Hacker/First Gen Tundra.com
Collapsible content
Fitment Notes
Shipping & Returns
Shipping & Delivery
Fr33 Lance Fab ships their products within the United States and Canada. Most products ship via UPS or USPS. Orders that exceed $600 may require a signature confirmation. The customer is responsible for import taxes and fees on international shipments.
Damaged or Missing Parts
In an instance where you receive a damaged package a claim must be made with Fr33 Lance Fab immediately. The claim can be submitted by sending an email to Orders@Fr33LanceFab.com containing photos of the damaged packages and damaged products. The email must also include your order number as well. Do not discard any of the original packaging or try installing the products. Failure to do the above may result in us not being able to assist. Alternatively you can open claim with UPS/USPS etc this would be same procedure we would be facilitating.
While every precaution is taken there could be a case where you are missing parts. If this happens please send an email to Orders@Fr33LanceFab.com with your order number, list of missing parts, and photo of the package or packages.
If the shipping carrier losses your package please contact Fr33 Lance Fab immediately. A claim will be filled with the shipping carrier. Unfortunately, we do not have control over UPS/USPS/FedEx and must wait for the carrier to process the claim. We will do our best to assist swiftly.
Parts Cancellations / Returns
Have questions or want to confirm your ordering correct parts before you order? Reach out to us at Info@fr33lancefab.com
No cancellations on parts such as spindles, stealth series, steering racks, pumps, CV, Driveshafts, suspension etc once ordered. This components are built per your order spec and are assigned as soon as you order.
Small parts cancellations and returns have ability to be returned within 30 days of being ordered but must be in new unopened/un used condition. Customer is subject to cover return shipping cost and a 15% restock fee to cover CC transaction fee/packaging material/re stocking.
Submit a request to Orders@fr33lancefab.com
Disclaimer
Fr33 Lance Fab aftermarket products and accessories are designed for off-road and high-performance use that may exceed the conditions intended by the original vehicle manufacturer.
All aftermarket and off-road components require regular inspection, maintenance, and replacement of worn parts. Failure to properly inspect, maintain, or install components may result in component failure and unsafe vehicle operation. Fr33 Lance Fab recommends all products be installed by a qualified professional.
By purchasing, installing, or operating these products, the customer, installer, owner, and driver acknowledge and accept all risks associated with their use, including on-road and off-road operation. The customer and driver assume full responsibility and liability for the vehicle, its operation, maintenance, inspection, and safe use after installation.
The customer, installer, owner, and driver expressly release, waive, and discharge Fr33 Lance Fab from any and all liability, claims, damages, losses, injuries, or death arising from the purchase, installation, use, misuse, maintenance, or operation of these products, including product failure or vehicle accidents of any kind.
After installation, all hardware must be re-torqued after the first 500 miles and inspected regularly thereafter. Off-road use and abuse can cause accelerated wear or damage to components.
No aftermarket parts can eliminate the inherent risks of vehicle operation. Always drive responsibly, wear seat belts, and ensure all passengers do the same.