Toyota Sequoia Big 7 Battery Cable Kit (Gen 1 - 2001-2007)
Toyota Sequoia Big 7 Battery Cable Kit (Gen 1 - 2001-2007)
Couldn't load pickup availability
Share
This upgraded battery cable kit replaces old worn out battery cables for more power and better performance from your vehicle.
What's the Big 3, and why do you sell a "Big 7"?
The "Big 3" (or sometimes called "Big 4") upgrade means improving the current capacity of three cables: 1) alternator output to battery positive, 2) battery negative to frame/body, and 3) engine ground to frame/body. We don't stop there though. Our "Big 7" kits also include the leads to the starter and the fuse relay box, as well as adding an external fuse to avoid routing the increase in current capacity through the smaller fuse box wiring.
What makes these cables so special?
We're nerds for specs and finer details around here. None of that CCA (copper-clad aluminum) that's used in inferior products, or stereo installations. We only use fine-strand, SAE (Society of Automotive Engineers) approved, pure copper cable. Then using a powerful electromechanical crimping machine, we crimp each solid-copper end, and finally finish the construction by adding a environmental seal made of marine grade heatshrink meeting MIL-I-23053/4. Also included are military style corrosion resistant battery connections and an ANL fuse and holder. To make the entire install simpler, every end will be labeled for ease of installation.
Do I need a bigger alternator to run these cables?
No. Every vehicle can benefit from our "better than factory" cables. The years, along with environmental damage from rain/salt water/corrosion, can greatly impact your electrical system. Our customers have consistently reported that their vehicle starts faster, charges the battery better, and many times cured electrical gremlins that were brought on by compromised wiring.
I've changed my mind! I want to run a bigger alternator!
Perfect! You're probably running a power inverter, a stereo, a winch, an under hood welder, or flux capacitor. These all require more amperage than the stock alternator is capable of providing. Maybe you're not running any of these yet, but considering it, these cables will get you ready!
2GA or 1/0 GA? Which to choose?
As far as 2GA vs 1/0 GA, it's really going to depend on what mods you're going to do to. If you're staying stock, then 2GA is plenty, but if you're looking at modifying it down the road (winches/lights/etc) and want to future proof, then you'd want 1/0 GA.
2/0GA? What's that? That sounds big! Do I need that?
If you like to order the biggest steak on the menu, run 42" Swampers on your stock axles, or like to flex on your friends, these are for you. You probably don't need them, but we've got them for you.
You might be interested in: Toyota 4Runner Big 7 Battery Cable Kit (Gen 5 - 2010-2024)
These aren't just any old Sequoia "big 3" cables, these are the "Big 7" from ToyotaCables!
Replaces 82122-34020, 82122-34022
For some of the Toyota kits there’s only two factory negative cables to replace
Collapsible content
Fitment Notes
Shipping & Returns
Shipping & Delivery
Fr33 Lance Fab ships their products within the United States and Canada. Most products ship via UPS or USPS. Orders that exceed $600 may require a signature confirmation. The customer is responsible for import taxes and fees on international shipments.
Damaged or Missing Parts
In an instance where you receive a damaged package a claim must be made with Fr33 Lance Fab immediately. The claim can be submitted by sending an email to Orders@Fr33LanceFab.com containing photos of the damaged packages and damaged products. The email must also include your order number as well. Do not discard any of the original packaging or try installing the products. Failure to do the above may result in us not being able to assist. Alternatively you can open claim with UPS/USPS etc this would be same procedure we would be facilitating.
While every precaution is taken there could be a case where you are missing parts. If this happens please send an email to Orders@Fr33LanceFab.com with your order number, list of missing parts, and photo of the package or packages.
If the shipping carrier losses your package please contact Fr33 Lance Fab immediately. A claim will be filled with the shipping carrier. Unfortunately, we do not have control over UPS/USPS/FedEx and must wait for the carrier to process the claim. We will do our best to assist swiftly.
Parts Cancellations / Returns
Have questions or want to confirm your ordering correct parts before you order? Reach out to us at Info@fr33lancefab.com
No cancellations on parts such as spindles, stealth series, steering racks, pumps, CV, Driveshafts, suspension etc once ordered. This components are built per your order spec and are assigned as soon as you order.
Small parts cancellations and returns have ability to be returned within 30 days of being ordered but must be in new unopened/un used condition. Customer is subject to cover return shipping cost and a 15% restock fee to cover CC transaction fee/packaging material/re stocking.
Submit a request to Orders@fr33lancefab.com
Disclaimer
Fr33 Lance Fab aftermarket products and accessories are designed for off-road and high-performance use that may exceed the conditions intended by the original vehicle manufacturer.
All aftermarket and off-road components require regular inspection, maintenance, and replacement of worn parts. Failure to properly inspect, maintain, or install components may result in component failure and unsafe vehicle operation. Fr33 Lance Fab recommends all products be installed by a qualified professional.
By purchasing, installing, or operating these products, the customer, installer, owner, and driver acknowledge and accept all risks associated with their use, including on-road and off-road operation. The customer and driver assume full responsibility and liability for the vehicle, its operation, maintenance, inspection, and safe use after installation.
The customer, installer, owner, and driver expressly release, waive, and discharge Fr33 Lance Fab from any and all liability, claims, damages, losses, injuries, or death arising from the purchase, installation, use, misuse, maintenance, or operation of these products, including product failure or vehicle accidents of any kind.
After installation, all hardware must be re-torqued after the first 500 miles and inspected regularly thereafter. Off-road use and abuse can cause accelerated wear or damage to components.
No aftermarket parts can eliminate the inherent risks of vehicle operation. Always drive responsibly, wear seat belts, and ensure all passengers do the same.